Chimney Sweep · Inspection · Repair — Across New Jersey 📞 (855) 424-6217
Eagle Chimney Services NJ logoEagle Chimney ServicesNew Jersey 📞 (855) 424-6217
Chase cover repair in progress — Chimney Chase Covers in New Jersey

Chimney Chase Covers in New Jersey

Custom chimney chase covers for New Jersey prefab chimneys — stainless replacements for rusted covers that leak and stain the siding.

Licensed & InsuredIn Business Since 2012Phones Answered 24/7Sunday–Friday · Saturday ClosedWritten Reports & Photos

If your chimney is a wood or siding chase with a metal top, that top is the chase cover — and on most New Jersey prefab chimneys it is a thin galvanized pan that was always going to rust through. The signs are classic: rust streaks running down the siding, water dripping inside the chase, a cover that ponds water instead of shedding it. Left alone, the water rots the chase framing and finds the flue.

We replace chase covers with custom-measured stainless steel: the old pan comes off, the chase top and flue connections are inspected while everything is open, and the new cover is fabricated with a proper cross-break so water runs off instead of pooling, sealed at every penetration. Stainless ends the replacement cycle — it is the last chase cover the house should need.

What Is Included

  • Measurement and inspection of the existing chase cover and chase top
  • Removal and disposal of the rusted cover
  • Inspection of flue caps, storm collars and chase framing while open
  • Custom-fabricated stainless steel cover with drainage cross-break
  • Sealing of all flue and pipe penetrations through the new cover
  • Photos of the finished cover and the chase top before and after

Request Service

Tell us about your chimney or gas fireplace — we confirm every request by phone. Prefer to talk? Call (855) 424-6217.

Something went wrong sending your request. Please call (855) 424-6217 and we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you! We will call you shortly to confirm. If it is urgent, call us now at (855) 424-6217.

Why galvanized covers always fail

The original covers on prefab chimneys are built to a price: thin galvanized steel, flat or nearly flat, so rain sits on them in a shallow pond that finds every seam and screw hole. Galvanizing buys years, not decades — and Shore air spends it faster. Once rust starts it perforates from the top while the underside still looks intact, which is why a chase can leak for a long time before the cover looks bad from the ground. Stainless steel with a raised cross-break solves both halves of the problem: the material does not rust through, and the shape does not hold water.

One flue or three — every penetration matters

A chase often carries more than the fireplace flue: furnace and water-heater vents pass through the same cover. Each penetration gets a collar and seal in the new pan, and each vent gets checked while the top is open — it is the one moment in the chimney’s life when all of it is visible at once. If a cap or collar is at end of life, replacing it during the cover job costs a fraction of a separate roof visit.

Services Covered Under Chimney Chase Covers

This work is searched for by many names. Every service below is performed as part of — or booked through — this one:

Chimney Chase Covers — Questions & Answers

How do I know my chase cover is failing?

Rust streaks on the siding below the chimney top, water stains on ceilings near the chimney, a drip you can hear inside the chase during rain, or visible rust on the cover itself from a ladder or drone photo. Any one of them earns an inspection.

Why stainless instead of another galvanized cover?

Because the galvanized one is why you are calling us. Stainless costs more once and ends the cycle; a like-for-like galvanized replacement restarts the same clock.

How long does replacement take?

Measurement happens on the inspection visit; the cover is fabricated to your chase, and installation is typically a few hours once it is on site. Total turnaround is usually measured in days, not weeks.

Can you just patch or coat the rusted cover?

Coatings over perforated metal are a short reprieve at best — the rust is through, not on, the surface. If the cover is genuinely sound with surface rust only, we will say so and quote the honest option.

Does the new cover include a cap?

The cover and the cap are separate parts. If your flue cap is sound it is refitted; if it is failing, replacing it during the same visit is the economical moment, and both options are quoted before work starts.

Related Services

Fireplace wide cleaning — Chimney Sweep in New Jersey

Chimney Sweep

A full sweep of the flue, firebox and smoke chamber — creosote gone, draft restored, and a written condition report before we leave.

Learn more →
Flue interior cracked tile — Chimney Inspection in New Jersey

Chimney Inspection

Level 1 and Level 2 chimney inspections with camera scanning, a photo report and straight answers — for annual checks, home sales and after a chimney fire.

Learn more →
Brick chimney open flue aerial — Level 1 Chimney Inspection in New Jersey

Level 1 Chimney Inspection

The annual inspection for chimneys in regular service: every accessible part checked, condition documented, safety confirmed for another season.

Learn more →
Flue damper before — Level 2 Chimney Inspection in New Jersey

Level 2 Chimney Inspection

Camera inspection of the entire flue, plus attics, crawl spaces and concealed areas — the inspection for home sales, chimney fires and appliance changes.

Learn more →